There are dozens of different variables that affect the way you run. Among the more familiar ones are VO2max, lactate threshold speed and running economy (or the rate of oxygen consumption at a given speed—the lower the better). One of the most under-appreciated performance-related running variables is ground contact time, or the amount of time your foot is in contact with the ground on each stride.
Ground contact time always decreases as running pace increases. If you accelerate from in the middle of a run, your ground contact time will decrease as your stride length increases and you spend more time airborne. The fastest runners tend to have the shortest ground contact times, so training specifically to reduce your ground contact time is an effective way to improve your running.
Researchers from Ryukoku University in Japan placed a high-tech video camera at the 15 km point of an elite half-marathon race and videotaped 415 runners as they passed it. The researchers then studied the tape to gather measurements of ground contact time for each runner. They observed a strong negative correlation between ground contact time and speed—that is, the feet of the fastest runners spent the least time in contact with the ground.
So why is short ground contact so beneficial to running performance? When your foot is in contact with the ground during running, you are not moving forward. You are only moving forward when airborne. So the more time you spend airborne and the less time you spend on the ground, the faster you run. Ground contact time is determined by three main factors: the ability to apply force to the ground very quickly (that is, power), by the stiffness of the leg at the moment of footstrike (a stiffer leg is able to capture more “free” energy from the ground and then reuse it), and by biomechanical characteristics such as the position of the foot in relation to the centre of gravity at footstrike (a foot that lands in front of the body’s centre of gravity acts as a brake and thus increases ground contact time).
So how do you train to reduce your ground contact time? Simple: You train to increase your stride power and leg stiffness and improve your biomechanics. The most basic way to add power to your stride is to regularly include some very fast running in your training. Once a week, after completing an easy run, do a set of short sprints—say, 6 x 60m at full speed. To minimize the risk of pulling a hamstring, do these sprints on a steep hill, if possible.
Studies have shown that plyometrics (jumping drills) and heavy weightlifting are effective ways to increase leg stiffness and, consequently, running economy. A little goes a long way. For example, in one study a regimen of 4 sets of 4 heavy half-squats performed 4 times per week produced big gains in running economy and time trial performance. A very efficient way to include some plyometrics in your training is to insert them within runs. For example, in the middle of a run, break stride and hop forward on one leg for 20 strides, then hop on the other leg. Gradually build up to 2 sets of 30 hops on each leg. (If you don’t like being laughed at, be sure no one’s around when you do this drill.)
Perhaps the simplest way to improve your running biomechanics to reduce ground contact time is to switch from a heel strike to a midfoot strike. In the Japanese half-marathon study mentioned above, researchers found a significant correlation between foot strike position and ground contact time: The average ground contact time for heel strikers was 199 milliseconds versus 183 milliseconds for midfoot and forefoot strikers. There was also a significant correlation between foot strike patterns and performance, with runners placing among the top 50 being almost twice as likely to be midfoot or forefoot strikers (36 percent versus 19 percent) as runners placing between 151st and 200th).
Start paying attention to where impact force is concentrated on the bottom of your foot when you run. Fiddle around with your stride to make that “ground zero” zone move slightly forward. Also try tilting your whole body very slightly forward from the ankles (not the waist!) as though you’re running downhill. This will force your foot to land underneath your hips, where it’s supposed to land, rather than out front, where it must hit heel first.
You probably have never put much thought into your ground contact time. After all, you can’t exactly measure it on your own. But you can improve it even without measuring it, and reducing the amount of time your feet are touching the earth as you run is one of the best things you can do to improve your running.
SOURCE: By Matt Fitzgerald (http://home.trainingpeaks.com)